找回密码
 新注册用户
搜索
查看: 4809|回复: 4

终于回来啦,有没有新闻看?

[复制链接]
发表于 2005-7-25 02:34:29 | 显示全部楼层 |阅读模式
顺便签到一下,最近太热,算FAH有点偷懒.
回复

使用道具 举报

发表于 2005-7-25 06:02:17 | 显示全部楼层
有的..........

见:http://samuel.lamost.org/bbs/ind ... mid=10&postid=2

VMZY 新近翻译的三篇新闻........
回复

使用道具 举报

发表于 2005-7-25 06:03:03 | 显示全部楼层
A cautionary note about Advanced methods, QMD, and big WUs.

There have been some questions about the use of flags and FAH's stability and I wanted to make an announcement to try to clear things up.

There are two flags in particular which are to be used with caution. The big WU flag gets big WUs, but these big WUs may be poorly suited for older machines. The bigWU flag combined with advanced methods brings big WUs that are more advanced (QMD"s right now).

Gromacs was originally released as an advanced only WU until we could work things out to make it more stable. By having a flag, one would have to opt in and the default (Tinker in that case) would be stable.

We've kept that philosophy throughout FAH. Right now, Gromacs is stable, but QMD is much less so. QMD is also a big WU, so one has to choose both QMD and advanced methods to get it. BigWU + adv gets highly experimental QMD WUs and they may not work well for all. We suggest that one only use both flags if you're absolutely sure this is what you want (if you're not sure what you want, I would suggest that you don't want QMD's).

We should have been more clear about this, but hopefully this post will help. Due to this confusion, I'm going to suspend QMD's until we can be sure that a significant number of people have gotten the word on this.

So, as a summary, advanced methods is just that -- something which may bring more points, but also more trouble. Please consider this tradeoff when you choose settings.
2005年7月15日
关于高级算法,QMD,和大WU的说明。

如今有很多关于参数的用途和FAH稳定性的一些疑问,我想就此说明一下,以澄清此事。

有两种参数要特别小心使用。下载大WUs的bigWU参数,这些大WUs并不适用于慢机器。使用advanced methods和bigWU参数下载的大WUs(现在是QMD)更是如此。

Gromacs最初是作为仅供快机器使用而发布的,直到我们能使它更加稳定的工作时才会完全开放。只有选中大WU选项才会打开BigWU参数,而默认参数(Tinker)很稳定。

我们冷静下来看FAH。现在,Gromacs是稳定的,但QMD却不。QMD也是大WU, 你必须同时打开QMD和advanced methods参数才能下载它。BigWU+adv会下载实验性的QMD WUs,并且他们现今运作还不太稳定。我们建议您没有必要不要同时使用这两个参数(如果您不是非要下载,我会建议您不要下载QMD) 。

我们应该对此更加明白,但原这个声明有帮助。由于这混乱,我将暂停QMD直到我们能肯定大多数人看到了这篇文章。

就这些了,总之,advanced methods就是--也许会带来更多积分,但也会带来更多麻烦。当您设置参数时请慎重考虑一下这样是否划算。

翻译BY VMZY
2005/7/16
回复

使用道具 举报

发表于 2005-7-25 06:03:18 | 显示全部楼层
7/17/2005
Plan for QMD rollout and new client mod
Our plan is to re-release QMD WUs starting on Monday around noon PST. Hopefully enough people will have heard about the various issues. We will release them gradually, starting with a high memory limit. The previous memory limit was set to 500MB. We'll start conservatively with a limit of 1000MB and then gradually work down from there. Note that in the current client, the memory reported to the AS is the total memory of the box. For SMP boxes, all clients will report the same amount of RAM, which is bad since they are in fact all sharing that RAM. Thus, we will re-release these with a large RAM request to try to help this issue.

In addition to this re-release plan, we are working to release a new v5 client rev which allows the donor to set the amount of RAM reported to the AS. Thus, if your dual has 1GB and you are running 2 clients, you can choose to report to the AS that each client should only use 500MB. One can also use this to simply request smaller WUs on machines. This is a "soft limit" as there is no code to ensure that the core sticks to this, but this soft request will still go a long way to allocating WUs correctly to machines. We are also considering the possibility of a hard limit, which would stop cores from using more memory than allocated. It is unclear whether this is a good idea (and how to do this right) and we will do more testing on this before we release this feature in v6.
2005年7月17日
QMD重新发放和新客户修改计划
我们计划在星期一中午左右(PST)开始重新发放QMD WUs。希望有足够多的人看到了全部的问题公告。我们即将重新发放他们,刚开始会有极高的内存限制。早先内存限制为500MB。从现在开始我们保守地将设为1GB内存限制,然后将逐渐的降低限制。注意,在当前的客户中,向AS报告的内存容量是机子的总内存量。对SMP机器而言,所有客户端将报告同样的RAM容量,这样不好因为实际上他们是分享所有的RAM。因而, 我们将发布一个带有大内存需求参数的新内核以求设法帮助解决这个问题。

除了这个重新发布计划之外,我们正在准备发布一个允许志愿者设置向AS报告的RAM容量的新v5客户端。因而, 如果您的双核系统有1GB内存并且同时运行2个客户端,您能选择向AS报告各个客户只拥有500MB内存。这样你可以请求到较小的WUs。这是"软件限制"尽管没有代码验证其数值的准确性,但这个软件需求限制在相当长的一段时间内将给大部分机器正确地分配WUs。并且我们也在考虑加入硬件限制,这会有效的防止内核使用内存量超限。现在还不清楚这是否是一个好想法(并且我们不知道究竟怎么做才好),在v6发布前我们将对此功能做更多的测试。

翻译 BY VMZY
05/7/19
回复

使用道具 举报

发表于 2005-7-25 06:03:32 | 显示全部楼层
7/18/2005
QMD re-relase commenced
We have re-released the QMD's, but with a higher memory restriction. Your machines will have to have 1GB of RAM in order to receive these WUs. We will lower this RAM requirement in the new future, but we want to start conservatively.
2005年7月18日
QMD重新发放开始
我们重新发放了QMD,但有一个很高的内存限制。为了下载这些WUs,您的机器必须有1GB内存。在未来,我们将逐渐降低这个RAM需求,但我们想要保守地开始。
7/18/2005
Proxy bug fixed
Adam has fixed a proxy bug recently reported and we are now testing this fix gradually. First the port 80 AS and certain work servers, then the main AS. So far, everything seems ok on our end, but it will take more of a complete roll out for donors to see a difference.
2005年7月18日
代理漏洞修正
Adam修正了最近被报告代理漏洞,我们现在正在逐渐测试这个修正。首先80端口AS和某些工作服务器,然后是全部AS。到目前为止,我们看来一切似乎正常,但它需要很多的志愿者参与才可能看出区别。

翻译 BY VMZY
05/7/19
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2024-5-3 16:27

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表