lunatics v0.41发布！！！支持v7！！！

snowyleaf

[Optimized apps] Windows installer v0.41 by William

03 Jun 2013, 11:03:24 am

Updated Installers, v0.41 for Windows Available now Due to temporary upload problems on the Lunatics website we are unfortunately unable to host this release ourselves at this time. We are working on it. For the time being please download from the mirror on Arkayn's site, Crunchers Anonymous HERE Many thanks to Arkayn for getting us out of a tight spot. Changes since last release (v0.40) are: -Update of all Multibeam applications to support MB 7 -Update of all Astropulse applications to latest release Please see this thread for full release notes. READ THEM before you install. Use at your own risk - 'your mileage may vary' While we take great care to find issues while alpha and beta testing, our testing systems comprise only a limited sample of what is out there and can't account for Murphy's Law.

codemake

收到，支持，谢谢

kittyjia

这是怎么回事。不能下载？试了几次了，都是这样。

nobodyk

终于发布了，等了太多天

arthur200000

主站wiki已经更新，需要下载的各位可以下载了。来自: Android客户端

coju

在哪里下载啊，麻烦给个链接？感谢

dianci

这个 lunatics优化是怎么用的啊？直接安装就行了吗？

nobodyk

dianci 发表于 2013-6-8 08:46
这个 lunatics优化是怎么用的啊？直接安装就行了吗？

下载后直接安装，按提示选择CPU和GPU选项，安装到BOINC的程序目录即可

codemake

奇怪的是，我用了以后计算速度反而不如官方的，其他人有这种情况吗？我是64位的win7

dianci

V7的分数怎么这么低啊，1个包才不到100分

kmydg2

GPU使用率只有60%多

snowyleaf

codemake 发表于 2013-6-9 20:10
奇怪的是，我用了以后计算速度反而不如官方的，其他人有这种情况吗？我是64位的win7 ...

估计是 安装的计算程式选择不正确~~


Known issues - general
The installer is supposed to shut down the BOINC client whilst leaving the Manager running - noticable from the red 'disconnected' dot in the tray. After finishing the BOINC client should restart and the red dot vanish when the Manager reconnects. This may take a few minutes. On some systems however this fails to work. Please ensure BOINC has restarted.
Advanced users only: If you know you are going to edit app_info.xml, it may be easier to shutdown and restart BOINC manually, so you can get the changes into app_info.xml before the restart.


CPU MB apps - AKv8c

If you have any doubt at all about what instruction sets your CPU supports, download CPU-Z from http://www.cpuid.com/softwares/cpu-z.html. We have now incorporated a 3rd party CPU feature detection tool into the installer. Unsupported applications will be greyed out.


CPU AP app - r1797

Updated from r555/r557


NVidia GPU (CUDA) app - x41zc

For details please see the separate ReadMe_x41zc.txt.

Rule of thumb selection guide:
Cuda 2.3: PreFermi - NOT to be used on Fermi/Kepler
Cuda 3.2: mixed systems
Cuda 4.2: Fermi
Cuda 5.0: Kepler
If you have run stock and have established APR you can also pick the fastest app from there.
For compatible cards see http://developer.nvidia.com/cuda-gpus
Should run on all NVidia CUDA cards with at least 512MiB video RAM.
Actual free memory required is in the region of 200-235MiB, depending on driver, OS flavour and CUDA variant. The code will scale up if more memory is available.
Running on a 256MiB card is just possible, but you will have to free up as much VRAM as possible, e.g. by disabling Aero.
Used video RAM can be checked with GPU-Z downloadable from http://www.techpowerup.com/downl ... werup-gpu-z-v0-7-1/
Watch closely on GPU-Z and in BOINC manager if the application finds enough memory.
Symptoms of insufficient memory are
- in BOINC manager: tasks start up and run a few seconds then go to 'waiting  to run' and the next task tries to start
- on GPU-Z: the sensor for memory shows used VRAM ramping up and almost immediately dropping again.
Depending on BOINC version your tasks will either error out with 'too many exits' or get stuck in an infinite loop.
If you don't have enough memory, set BOINC to NNT, abort tasks and uninstall the CUDA application by rerunning the installer with CUDA MB UNticked.
If in doubt ask for help on NC:
http://setiathome.berkeley.edu/forum_forum.php?id=10
To multithread on Fermi/Kepler cards, find all instances of <count>1</count> in app_info.xml and decrease to 0.5 or 0.3 to run two or three tasks in parallel.
Again, if  you are uncertain of how to do this correctly, ask on the above mentioned forum. 'Your mileage may vary' - it depends on your specific system which count will give the highest throughput.
For full release notes and history please see the readme provided in the docs folder [after install].


NVidia (OpenCL) AP app - r1843

Please see the separate ReadMe_AstroPulse_OpenCL_NV.txt for details.
Reserving one CPU core per GPU card will improve performance.


ATI (OpenCL) MB app - r1843

Please see separate ReadMe_MultiBeam_OpenCL_ATI.txt for details, especially on driver requirements.
Reserving one CPU core per GPU card will improve performance.
We offer the MB application in two different variants, depending on card:
plain - for most HD4xxx owners and those with HD5xxx, HD6xxx cards and  HD7xxx cards who suffer from driver incompatibilities.
HD5 - for most if not all owners of HD5xxx GPUs and HD6xxx GPUs. For most HD7xxx cards ('Tahiti' core cards may prefer the plain app).

ATI (OpenCL) AP app - r1843
ATI (Brook) AP app - r1854

Please see separate ReadMe_AstroPulse_OpenCL_ATI.txt or ReadMe_AstroPulse_Brook.txt for details, especially on driver requirements.
Reserving one CPU core per GPU card will improve performance.

For cards without OpenCL support (from HD2xxxx on) use the 'hybrid' r1854 Astropulse application. NB this is a combined CPU/GPU application and will only use the GPU for some of the calculations, while doing the rest on a CPU core.
Minimum driver version Catalyst 9.x.
The Hybrid AP application uses about 80% of a CPU core and does only about 20% of the calculations on the GPU. Parameters have been choosen to reflect this usage. However present BOINC can not reserve '0.8' of a CPU core and therefore reserves none. This means your CPUs will be overcommitted and runtimes and DCF (if applicable) will suffer. You do increase the overall output though.

codemake

snowyleaf 发表于 2013-6-14 22:24
估计是 安装的计算程式选择不正确~~

不太明白，我是inter i7 2600的cpu，gpu是 nvidia gf545，64位的win7，应该如何安装？