找回密码
 新注册用户
搜索
查看: 4962|回复: 14

Smp2包断粮啦!!!

[复制链接]
发表于 2010-5-11 12:14:16 | 显示全部楼层 |阅读模式
今天中午开始 所有的SMP2包都拿不到了 一直在下载B4.exe 但是都是失败 无语等待ing...
回复

使用道具 举报

发表于 2010-5-11 12:33:40 | 显示全部楼层
b4下载没失败。。。然后收到b4包  ppd200 哭了
回复

使用道具 举报

发表于 2010-5-11 12:35:31 | 显示全部楼层
本帖最后由 lcfwindows 于 2010-5-11 12:37 编辑

error.jpg




我的也是,一直显示下载失败
回复

使用道具 举报

发表于 2010-5-11 12:44:06 | 显示全部楼层
家里这几天在boinc 没跑fah的人  路
单位早上的smp2包还没跑完的人  过
回复

使用道具 举报

发表于 2010-5-11 14:28:48 | 显示全部楼层
本帖最后由 ONLY 于 2010-5-11 14:30 编辑

删掉目录下的work文件夹和quere.dat文件,便可重新下载到SMP2 A3包~~~

偶顺手删掉了Core_a3.exe文件~~~

结果下载了2.19版A3核心~~~      

是否对ppd有影响还在观察中~~~

Snap110.jpg
回复

使用道具 举报

发表于 2010-5-11 14:53:19 | 显示全部楼层
回复 1# vennyfan

May 10, 2010
Update on WU shortage
We've been working on the WU shortage issue and have some positive items to report.

First, we have greatly improved the AS logic so it uses more information about the CPU.  This information is only available in the v6 client or later, so it is important to upgrade to v6 if you're not getting WUs.  The main jist is that we can now identify directly whether a machine has SSE or SSE2 support directly, so we can better assign to cores that only support SSE or SSE2 (such as the protomol core, which currently only supports SSE2).  This should be a big help to Linux clients as well, which were not well handled by the AS before.

Second, there are a lot of available WUs for Protomol right now, but only for advanced methods clients.  If you would like to try that out, set your client for the "Advanced Methods" setting.  Note that the Protomol team looks to have fixed the checkpoint bug (which has kept this core in the Advanced Methods QA level) and we hope to roll out this core to all of FAH once again, with this issue fixed.

Finally, we have also identified a potential issue with the AS code which might make its logic fail in certain cases.  Basically, in the old days of FAH, we could get away with 32-bit floating point numbers for internal AS calculations, but now with so many servers and all of FAH's complexities, floating point roundoff for certain AS logic could be causing problems.  We will be working on a fix for this, but this is something we must do carefully (not just a global replace of float -> double) and so it will take some time to implement and test this.
大意:
缺粮进展
首先,我们调整了AS代码,现在能根据cpu按需分配了(需要v6版客户端支持,建议大家尽快升级)不会再把sse2任务分给不支持sse2的机器了。以前Linux不支持按需分配,现在支持了。
其次,现在Protomol任务很多,不过都是测试任务。如果你想算这些任务,就请打开"Advanced Methods"设置。注:Protomol开发组好像解决了Protomol存盘点异常的bug(之前就是因为这个原因,把Protomol从正式版降回测试版的),如果一切顺利,我们会尽快将Protomol转回正式版。
最后,我们发现了AS代码的一处潜在隐患。随着fah的发展,32位浮点型(float)貌似不够用了。我们会择机把代码升级至double,不过这个改动太大,我们需要小心行事。

low on jobs for Pentium 2/Pentium 3 CPUs -- and a discussion for why that happens and how you can help
We're low on jobs for machines w/o SSE capabilities.  We are working to fix this.

By the way, I often get asked "how come FAH can get low on jobs?"  This is a good question, considering that since FAH studies temporal phenomena, when one (Work Unit) WU comes in, the work servers automatically build the next one.  So, it should be impossible (o rat least very difficult) to run out of jobs, IF everyone plays by the rules.

But that's not the case.  Many people attempt to "cherry pick" WUs, i.e. they dump WUs until they get one which is most favorable for them points-wise.  This means that they take away WUs from other people, since our server waits until the WU times out before sending it to someone else.  This can take a long time on certain WUs.

We have several schemes implemented to fight cherry picking and keep WUs flowing to all the donors, but some times the cherry picking gets very aggressive and we run out of WUs, like today.  We are looking into addressing this issue short term (getting more jobs going) as well as long term (better solutions to cherry picking problems).  The FFF bonus scheme is such an example of a plan, which seems to be working reasonably well.  We are looking into expanding it more broadly.

However, you can help us help other donors (and keep our research going).  Please do not cherry pick WUs.  This slows down FAHs progress, makes other donors unhappy, and (eg based on FFF schemes) will lead to lower points for those who do this in the future.
大意:
Pentium 2/Pentium 3 CPUs(sse任务)缺粮
有些人经常会问,为什么会缺粮。其实FAH服务器上基本上不缺任务,大部分是因为‘某些人’的行为造成的。他们‘挑食’,遇到‘不合算’的任务(PPD不高)就删除,直到接到合适任务为止。而这些所谓的‘不合算’任务,就会堆积在服务器上,直至过期才会发给其他人。最后就出现了,服务器上有任务,却发不出去的情况。
我们正在需求解决这个问题的办法。目前看来奖励积分是个不错的办法,我们准备大范围推广。
如果你真的想为科研做贡献,请不要‘挑食’了,这样会减慢FAH的研究进度,损害其他人的利益。将来对‘挑食’,我们准备采取积分扣减的惩罚性政策。
回复

使用道具 举报

发表于 2010-5-11 17:56:13 | 显示全部楼层
删掉目录下的work文件夹和quere.dat文件,便可重新下载到SMP2 A3包~~~

偶顺手删掉了Core_a3.exe文件~ ...
ONLY 发表于 2010-5-11 14:28



    我删掉重新下载了  结果还是2.17的。
回复

使用道具 举报

 楼主| 发表于 2010-5-11 18:40:50 | 显示全部楼层
呵呵 删掉就好了
回复

使用道具 举报

发表于 2010-5-11 19:47:21 | 显示全部楼层
[03:52:02] + Processing work unit
[03:52:02] Work type a0 not eligible for variable processors
[03:52:02] Core required: FahCore_a0.exe
[03:52:02] Core not found.
[03:52:02] - Core is not present or corrupted.
[03:52:02] - Attempting to download new core...
[03:52:02] + Downloading new core: FahCore_a0.exe
[03:52:02] Downloading core (/~pande/Win32/x86_Deino/Core_a0.fah from www.stanford.edu)
[03:52:03] - Error: HTTP GET returned error code 404
[03:52:03] + Error: Could not download core
[03:52:03] + Core download error (#2), waiting before retry...

[03:52:22] + Downloading new core: FahCore_a0.exe
[03:52:22] Downloading core (/~pande/Win32/x86_Deino/Core_a0.fah from www.stanford.edu)
[03:52:23] - Error: HTTP GET returned error code 404
[03:52:23] + Error: Could not download core
[03:52:23] + Core download error (#3), waiting before retry...


为什么我是A0找不到。。。。
回复

使用道具 举报

发表于 2010-5-11 20:06:13 | 显示全部楼层
晕,在北京出差,你们告诉我这么坏的消息,家里的机器怕是吃不饱了.......
回复

使用道具 举报

发表于 2010-5-11 20:15:19 | 显示全部楼层
再坚持2天就进500强了。
回复

使用道具 举报

发表于 2010-5-11 22:54:00 | 显示全部楼层
今天上午有问题,应该从中午开始就好了。
回复

使用道具 举报

发表于 2010-5-12 10:14:10 | 显示全部楼层
回复 12# maxzong

兄弟目前粗大的很啊跑了2个BIGADV?还是加了一堆显卡?
回复

使用道具 举报

发表于 2010-5-12 13:31:47 | 显示全部楼层
回复 13# 金鹏

金版近来估计是正事比较多吧。我陆陆续续加了2-3块二手显卡,这样可以让所有的显卡有个轮休的机会。又拼了台I7 930,所以分数有点上升。不过一直想拼的服务器还是没下决心,所以看到SACO 试跑 双U (Xeon 5650)还是蛮羡慕的。

大家一起努力,3213 PPD 百万在望。

评分

参与人数 2基本分 +22 收起 理由
vennyfan + 7 我很赞同
金鹏 + 15 我很赞同

查看全部评分

回复

使用道具 举报

发表于 2010-5-12 14:23:41 | 显示全部楼层
回复 14# maxzong

最近工作比较忙,呵呵不过FAH也算是正事

难怪兄弟PPD一下暴涨20K+,呵呵全线开始发力了,被你超越也就是一季度内的事情了
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2025-5-16 01:51

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表