跑FAH蓝屏了

muclemanxb · 发表于 2010-2-4 21:14:26

系统是XP+SP3+最新hotfix
GF8400M GS 128MB
驱动和蓝屏见附图，display就会挂掉，运算是
PS：任务deadline date是这个月7号，不知道是不是任务最后期限？
附上log

cuihao · 发表于 2010-2-4 22:01:47

事实上，根据log，我觉得你根本没有开始计算。是立即就蓝屏了吗？

金鹏 · 发表于 2010-2-4 22:07:06

N卡计算FAH不要打开DISPLAY,基本上立马蓝屏

兄弟可以使用FAHMON监控计算进度

cuihao · 发表于 2010-2-4 22:10:39

另外，这样的低端显卡估计不能按时算完哦。
我的9400GT 128MB，要不停计算16h+，并且一不小心就出错了

。

universebreaker · 发表于 2010-2-4 22:15:32

我也有這個情況
console版沒問題,但system tray版的每次開viewer就藍屏重啟
當時有加NV_FAH_CPU_AFFINITY參數(為0)
會不會和這有關?

金鹏 · 发表于 2010-2-4 22:20:02

NV_FAH_CPU_AFFINITY 变量值为 0 不合适吧

双核用3 四核用15

金鹏 · 发表于 2010-2-4 22:21:11

3天的期限的确紧张，显存小于256M借用内存很容易出错

Flyhawk1 · 发表于 2010-2-4 23:18:25

还没开算就挂掉了...

TXT写着
[11:23:24] Working on Protein
[11:23:24] Run: exception thrown during GuardedRun
[11:23:24] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[11:23:24] Going to send back what have done -- stepsTotalG=0
[11:23:24] Work fraction=0.0000 steps=0.

算了8个353......没一个成功的.
这笔记本显卡会不会还有供电的缺陷问题?

universebreaker · 发表于 2010-2-5 00:34:06

0不是all cores 嗎?
要知道我可是用p4 [email protected]來餵gigabyte的9800gt....
那麼p4單核雙線應怎樣設...?

Bismarck · 发表于 2010-2-5 01:13:59

原帖由金鹏于 2010-2-4 22:07 发表
N卡计算FAH不要打开DISPLAY,基本上立马蓝屏

兄弟可以使用FAHMON监控计算进度

不蓝的漂过……

muclemanxb · 发表于 2010-2-5 13:17:14

原帖由 cuihao 于 2010-2-4 22:01 发表
事实上，根据log，我觉得你根本没有开始计算。是立即就蓝屏了吗？

开始计算没什么问题，等了一会display就蓝屏了，不知道计算进度。

muclemanxb · 发表于 2010-2-5 13:20:10

N卡计算FAH不要打开DISPLAY,基本上立马蓝屏
兄弟可以使用FAHMON监控计算进度

昨晚暂停计算，然后待机，刚才从待机中恢复以后貌似一切正常，在重新计算，就又挂了～死机，无反应，只好断电～
重启已经无法继续了，见log最后几行～
[13:09:30] Verified work/wudata_07.log
[13:09:30] Verified work/wudata_07.edr
[13:09:31] Verified work/wudata_07.xtc
[13:19:25] Completed 1%
[13:29:49] Completed 2%
[13:40:22] Completed 3%
[13:50:38] Completed 4%
[14:01:17] Completed 5%
[14:11:48] Completed 6%
[14:22:52] Completed 7%
[14:34:01] Completed 8%
[14:44:26] Completed 9%
[14:55:49] Completed 10%
[15:08:17] Completed 11%
[15:13:30] + Paused
[15:23:55] + Working ...
[15:23:55] Suspending work thread...
[15:23:55] Resuming work thread...
[15:26:55] Timer requesting checkpoint
[15:28:58] Completed 12%
[15:29:55] Timer requesting checkpoint
[15:32:55] Timer requesting checkpoint
[15:35:55] Timer requesting checkpoint
[15:38:55] Timer requesting checkpoint
[15:39:22] Completed 13%
[15:41:55] Timer requesting checkpoint
[15:44:55] Timer requesting checkpoint
[15:47:55] Timer requesting checkpoint
[15:49:10] Completed 14%
[15:50:55] Timer requesting checkpoint
[15:51:53] + Paused
[04:39:50] Suspending work thread...
[04:39:50] Timer requesting checkpoint
[04:39:50] Resuming work thread...
[04:39:50] mdrun_gpu returned
[04:39:50] Going to send back what have done -- stepsTotalG=15000000
[04:39:50] Work fraction=0.1429 steps=15000000.
[04:39:54] logfile size=14480 infoLength=14480 edr=0 trr=25
[04:39:54] + Opened results file
[04:39:54] - Writing 15018 bytes of core data to disk...
[04:39:54] Done: 14506 -> 4585 (compressed to 31.6 percent)
[04:39:54] ... Done.
[04:39:54] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[04:39:54]
[04:39:54] Folding@home Core Shutdown: UNSTABLE_MACHINE
[04:39:57] + Working ...
[05:01:56] - Ask before connecting: No
[05:01:56] - User name: muclemanxb (Team 3213)
[05:01:56] - User ID: 6415DCD26D26DC10
[05:01:56] - Machine ID: 2
[05:01:56] Loaded queue successfully.
[05:01:56] Initialization complete
[05:01:56] + Processing work unit
[05:01:56] Core required: FahCore_11.exe
[05:01:56] Core found.
[05:01:57] Working on queue slot 07 [February 5 05:01:57 UTC]
[05:01:57] + Working ...
[05:01:57] Folding@Home GPU Core
[05:01:57] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[05:01:57] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[05:01:57] Build host: amoeba
[05:01:57] Board Type: Nvidia
[05:01:57] Core    :
[05:01:57] Preparing to commence simulation
[05:01:57] - Looking at optimizations...
[05:01:57] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[05:01:57] - Created dyn
[05:01:57] - Files status OK
[05:01:57] Error: Missing work file=<>
[05:01:57] Folding@home Core Shutdown: MISSING_WORK_FILES
[05:02:01] CoreStatus = 74 (116)
[05:02:01] The core could not find the work files specified. Removing from queue
[05:02:01] Deleting current work unit & continuing...
[05:02:05] - Preparing to get new work unit...
[05:02:05] + Attempting to get work packet
[05:02:05] - Connecting to assignment server
[05:02:06] - Successful: assigned to (171.67.108.21).
[05:02:06] + News From Folding@Home: Welcome to Folding@Home
[05:02:06] Loaded queue successfully.
[05:02:09] + Closed connections
[05:02:14] + Processing work unit
[05:02:14] Core required: FahCore_11.exe
[05:02:14] Core found.
[05:02:14] Working on queue slot 08 [February 5 05:02:14 UTC]
[05:02:14] + Working ...
[05:02:14] Folding@Home GPU Core
[05:02:14] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[05:02:14] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[05:02:14] Build host: amoeba
[05:02:14] Board Type: Nvidia
[05:02:14] Core    :
[05:02:14] Preparing to commence simulation
[05:02:14] - Looking at optimizations...
[05:02:14] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp
[05:02:14] - Created dyn
[05:02:14] - Files status OK
[05:02:15] - Expanded 64947 -> 344387 (decompressed 530.2 percent)
[05:02:15] Called DecompressByteArray: compressed_data_size=64947 data_size=344387, decompressed_data_size=344387 diff=0
[05:02:15] - Digital signature verified
[05:02:15] Project: 5781 (Run 26, Clone 481, Gen 2)
[05:02:15] Assembly optimizations on if available.
[05:02:15] Entering M.D.

shouldbe · 发表于 2010-2-5 15:29:29

笔记本慎用

Schumacher · 发表于 2010-2-5 21:26:48

GF 8系列移动显卡貌似都有问题，而且出自nvidia方面，好像是材料热膨胀方面的问题，不建议用此类显卡计算f@h。

muclemanxb · 发表于 2010-2-5 22:52:44

那岂不是说～基本上这张GF8400MGS算是彻底没戏啊？
FAH彻底把我拒了～内牛满面
真应了前面某位老兄的话：想做点贡献真难啊～

		自动登录	找回密码
密码			新注册用户

[求助] 跑FAH蓝屏了

回复 #2 cuihao 的帖子

回复 #4 cuihao 的帖子

回复 #6 金鹏的帖子

回复 #14 Schumacher 的帖子

浏览过的版块