找回密码
 新注册用户
搜索
查看: 3891|回复: 6

BOINC 不运行 SETI@home 啦,求救

[复制链接]
发表于 2007-6-25 09:28:11 | 显示全部楼层 |阅读模式
原本正常,试着囤粮,于是通过调用网页上的参数设定将“保留工作天数”从默认的.25天改为10天,然后保存,此时BOINC就不运行了,必须点击工具栏“活动”中的“一直运行”才开始跑,如果选择默认的“依据参数”,就马上停了,显示暂停计算:用户活跃,好奇怪
现在有6个任务,都没选择暂停,却不跑了,为什么?网页上的参数似乎没有改为初始的设定啊
Untitled.gif
Untitled1.gif
其他参数如下:
Processor usage

Do work while computer is running on batteries? --->no
Do work while computer is in use?                     --->no
Do work only after computer is idle for               ---> 1 minutes
Do work only between the hours of --------------------->(no restriction)
Leave applications in memory while suspended? ------>no
Switch between applications every ----------------------->1 minutes
On multiprocessors, use at most 16 processors------->Use at most
Enforced by version 5.6 and greater----------------------> 100 percent of CPU time

Disk and memory usage

Use at most 100 GB disk space
Leave at least
(Values smaller than 0.001 are ignored) 0.001 GB disk space free
Use at most 50% of total disk space
Write to disk at most every 60 seconds
Use at most 75% of page file (swap space)
Use at most
Enforced by version 5.8 and greater 50% of memory when computer is in use
Use at most
Enforced by version 5.8 and greater 90% of memory when computer is idle

Network usage

Computer is connected to the Internet about every
(Leave blank or 0 if always connected.
BOINC will try to maintain at least this much work.)  days
Maintain enough work for an additional--------------------->10 days
Confirm before connecting to Internet?
(matters only if you have a modem, ISDN or VPN connection) no
Disconnect when done?
(matters only if you have a modem, ISDN or VPN connection) no
Maximum download rate: no limit
Maximum upload rate: no limit
Use network only between the hours of
Enforced by versions 4.46 and greater (no restriction)
Skip image file verification?
Check this ONLY if your Internet provider modifies image files (UMTS does this, for example).
Skipping verification reduces the security of BOINC. no
回复

使用道具 举报

发表于 2007-6-25 09:30:20 | 显示全部楼层
想运行就选一直运行
54依参数运行
回复

使用道具 举报

 楼主| 发表于 2007-6-25 10:01:06 | 显示全部楼层
以前都是这样设定的,现在这种情况,会导致所有机器都会停止运行,除非每台机器都设定为一直运行,那会干扰到其他工作的。
回复

使用道具 举报

发表于 2007-6-25 10:14:22 | 显示全部楼层
lz 很牛哦,我倒你这个分数用了1年半还多
回复

使用道具 举报

发表于 2007-6-25 11:12:51 | 显示全部楼层
Do work while computer is in use?                     --->no


改为                                                             yes   
回复

使用道具 举报

 楼主| 发表于 2007-6-25 12:26:02 | 显示全部楼层
这个的意思就是一直运行,好在BOINC能自动处于最弱的优先级,也行是我无意中修改了这参数?多谢楼上的兄弟们啦。
回复

使用道具 举报

 楼主| 发表于 2007-6-25 12:28:47 | 显示全部楼层
原帖由 symbol 于 2007-6-25 10:14 发表
lz 很牛哦,我倒你这个分数用了1年半还多

我用了一个月,主要是设备的更新带来的动力
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 新注册用户

本版积分规则

论坛官方淘宝店开业啦~

Archiver|手机版|小黑屋|中国分布式计算总站 ( 沪ICP备05042587号 )

GMT+8, 2025-5-12 17:29

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表