|
本帖最后由 金鹏 于 2011-6-6 14:25 编辑
貌似2.5倍于目前原子数最多的2692包的6903超级包等着大牛和大神级的兄弟们去尝鲜折磨你们的神U了
./fah6 -bigbeta -smp 12 或者 ./fah6 -bigbeta -smp 16 ?
http://foldingforum.org/viewtopic.php?f=66&t=18756
We are preparing to release a new A5 bigbeta/bigadv project. This one will be a little larger than the current generation of A5 projects, and it will enable us to tackle a new set of important scientific questions.
Because the work units are a bit larger, we are setting higher memory and processor limits:
2G+ RAM, 12 cores+
We may adjust both of these as necessary.
We'll also start these work units out as 64-bit Linux only.
Initial points values and deadlines are similarly subject to change but currently stand at:
Base points: 30964
Deadline: 17 days
Preferred deadline: 10.2 days
k-factor: 26.86
I'm pretty sure that a Linux system with appropriate configuration and the -bigbeta flag will be enough to get them ...
Project: 6903
Average time/frame: 00:42:17
CPU: Opteron G34 6134 @ 2.3 GHz
# of CPU sockets: 2
# of Physical cores: 16
# of FAH CPU processes: 1
# of FAH GPU Clients: 0
RAM GB installed: 32
RAM Type: DDR3
RAM Speed: 1333 (Not sure about timing)
OS / Linux kernel: Arch Linux x64
Running in VM: No
According to HFM = 131.5K PPD
Project: 6903
Average time/frame: 0:41:57 {in hh:mm:ss}
CPU: i7 970 @ 4.2 GHz
# of CPU sockets: 1
# of Physical cores: 1
# of FAH CPU processes: 12
# of FAH GPU Clients: 0
RAM GB installed: 6
RAM Type: {DDR3 /2000}
RAM Speed: 2009Mhz 9-9-9-24-110-2T
OS / Linux kernel:Ubuntu 10.10 / 2.6.35-28 Generic-ck
Running in VM: {No}
0:33:36 tpf is avg of 2 frames
Project: 6903
Average time/frame: 0:33:36 {in hh:mm:ss}
CPU: X5660 @ 2.8 GHz (turbo is on but cat/proc/cpuinfo does not show it)
# of CPU sockets: 2
# of Physical cores: 12 (24 threads)
# of FAH CPU processes:
# of FAH GPU Clients:0
RAM GB installed: 8 4x 2gb (so dual chan)
RAM Type: {DDR/DDR2/DDR3} DDR3 (should be known given cpu but w/e)
RAM Speed: 1333
OS / Linux kernel: Linux 2.6.18-194.el5
Running in VM: {Yes/No} No
Project: 6903
Average time/frame: 0:12:15 {in hh:mm:ss}
CPU: Opteron 6180SE
# of CPU sockets: 4
# of Physical cores: 48
RAM GB installed: 32
RAM Type: DDR3-1333
RAM Speed: 1386Mhz 6-7-5-20 1T
Above is running stable at 2.6ghz.
2.7ghz was unstable -- likely memory (2 modules were running at 5-6-5 1T @ 1066), OR much higher temperatures on 6903 vs. 6901. (see separate post on this. |
|