|
对于 Windows NT/2000/XP/2003 操作系统,可以把 Prime95 安装成系统服务,以便在注销状态也能运行,特别是在电脑是作为服务器使用的时候。
先下载 Prime95 : ftp://mersenne.org/gimps/p95v238.zip
再下载 NTPrime : ftp://mersenne.org/gimps/winnt235.zip
以下摘自 Readme.NT:
Install and configure prime95:
1) You must also install and run the normal GUI-based GIMPS client,
prime95.exe, to configure this service. Install this prior to
installing the service.
2) Follow the prime95.exe instructions to configure the client.
3) Make sure the Options/Start at Bootup option is not set.
4) Exit prime95.exe
Now install the service:
1) Unzip the ntprime.exe program in the same directory as prime95.exe.
2) Run "ntprime -install" to install the Service.
3) From Services in the Control Panel, select "Prime Service" and click Start.
To configure the service after it is installed:
1) Stop the service.
2) Run Prime95, make your configuration changes.
3) Exit prime95.
4) Start the service.
简要翻译如下,不妥的地方请大家批评指正:
安装并配置 prime95
1) 先安装并运行 prime95.exe
2) 按照 prime95.exe 的指引配置客户端
3) 确认 Options/Start at Bootup 没有勾上
4) 退出 Prime95.exe
现在安装服务:
1) 把 ntprime.exe 解压到 prime95.exe 的目录下
2) 运行 "ntprime -install" 安装服务
3) From Services in the Control Panel, select "Prime Service" and click Start.
3) 在服务控制面板,找到 "Prime Service",单击“启动”。
如果在服务安装后要改变配置
1) 停止服务
2) 运行 Prime95,改变你的配置
3) 退出 Prime95
4) 启动服务 |
|